Level Up Your Setup and Your Prime - Ages 18-24? See if you're eligible for Prime for Young Adults

Scratches and Scuffs Can Ruin an Expensive Anker Power Bank Fast

Tossing a high-capacity Anker battery pack into a bag without protection is a recipe for cosmetic damage, and sometimes worse. Ports collect dust, displays pick up micro-scratches, and cables tangle around everything in sight. That’s exactly why a solid cup holder anker power bank accessory setup matters. The products in this roundup include silicone protective cases from SIKAI CASE and JDHDL sized for specific Anker models, magnetic cup holders from RARAYC that mount on metal surfaces, and hard-shell carrying cases from casmilee and ALLPRIMO built to keep your portable charger safe on the go. Prices sit between $11.99 and $17.99, so none of these will break the bank. If you’re looking for ways to protect a larger Anker unit, you might also want to check out our guide on extra large Anker power banks to see which models pair well with these accessories.

Each product here solves a different problem. The silicone cases add grip, dust protection, and even SD card storage slots for photographers. The hard-shell EVA cases offer shockproof, splash-resistant organization with mesh pockets for USB-C cables and small accessories. And the magnetic cup holder set uses six rare earth magnets per base to keep containers secure on boats, trucks, RVs, or any metal surface thicker than 1.2mm. Based on available product specifications and user feedback, these accessories can help extend the life of your Anker power bank while keeping your charging gear organized during travel, commuting, or outdoor adventures. If you also need an ergonomic Anker power bank that’s comfortable to hold on its own, that’s worth exploring too.

1
Best Seller

SIKAI Silicone Case for Anker Prime 27,650mAh 250W

SIKAI CASE
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This is a silicone protective case designed specifically for the Anker Prime 27,650mAh 250W power bank, not a power bank itself. Its biggest advantage is the combination of durable silicone protection, built-in SD/TF card storage slots, and a 1/4-inch copper screw hole, making it best suited for photographers, frequent travelers, and content creators who want to protect their high-end Anker power bank while keeping memory cards organized.
Pros & Cons

Pros

  • Purpose-built for the Anker Prime 27,650mAh 250W (A1340) with precise port and display cutouts, so there is no guesswork about compatibility
  • SD card and SIM card storage slots add genuine utility for photographers, content creators, and international travelers who carry multiple memory cards
  • The 1/4-inch screw hole enables tripod or rig mounting, which is a thoughtful addition for users who already carry the Anker Prime for camera or content-creation gear
  • Silicone material provides a grippy, shock-absorbing layer that may help protect against everyday bumps and surface scratches
  • Built-in handle makes it easier to carry a large, heavy power bank without needing a separate pouch or bag

Cons

  • This is an accessory case only and does not include the Anker Prime power bank itself, which must be purchased separately
  • Adding a silicone case increases the overall size and weight of an already large and heavy power bank, which may reduce portability for everyday-carry users
  • Only compatible with the specific Anker Prime 27,650mAh 250W model (A1340), so it will not fit other Anker power banks or competing brands
Detailed Review

The SIKAI CASE silicone cover is a protective accessory designed exclusively for the Anker Prime 27,650mAh 250W power bank (model A1340). This is not a power bank or charger - it is a third-party silicone case that wraps around the Anker Prime to provide scratch, dust, and impact protection. It best suits photographers, content creators, frequent travelers, and anyone who has invested in the premium Anker Prime power bank and wants to keep it in top condition during daily use, travel, or outdoor activities.

The case features precise cutouts that the manufacturer states are custom-matched to every detail of the Anker Prime 250W, including its display screen, data transfer ports, and rated information labels. This means users should be able to monitor battery status, connect cables, and access all ports without removing the case. The soft silicone material adds a grippy, non-slip texture to the power bank's surface, which may help prevent it from sliding off tables or slipping out of hands. SIKAI CASE describes the material as solid silicone rather than a thin skin, suggesting a focus on durability over minimal added bulk.

One of the most distinctive features is the built-in SD card, TF card, and SIM card storage module. For photographers and content creators who carry the Anker Prime to power cameras and other gear on location, having dedicated card slots directly on the power bank case can reduce the risk of losing small, easily misplaced memory cards. The integrated 1/4-inch copper screw hole is another practical addition, allowing users to mount the cased power bank onto standard tripods, camera rigs, or mounting accessories. This is a niche but genuinely useful feature for users who already integrate the Anker Prime into their production workflows.

The case also includes a built-in handle, which addresses a real-world concern: the Anker Prime 250W is a large, heavy power bank, and carrying it without a grip or case can be awkward. The handle provides a more secure way to transport the unit, whether moving between rooms, packing for a trip, or carrying gear on set. External dimensions are listed at approximately 6.54 x 2.44 x 2.64 inches, which adds some bulk beyond the Anker Prime's own footprint. Users who prioritize the most compact possible carry should factor in this size increase.

The most significant limitation is compatibility. This case is designed solely for the Anker Prime 27,650mAh 250W (A1340). It will not fit other Anker models, other capacity variants, or power banks from competing brands. Additionally, while the silicone provides cushioning, the manufacturer does not list any specific drop-protection rating, water resistance, or IP rating, so users should not assume the case offers rugged or weatherproof protection. The added size and weight of the case on top of an already substantial power bank may also make it less practical for users who prefer ultralight or minimal setups.

For anyone who already owns the Anker Prime 250W power bank and wants to protect their investment, the SIKAI CASE silicone cover offers a well-thought-out combination of protection, grip, card storage, and mounting capability. Photographers and content creators who carry both the Anker Prime and camera gear will likely get the most value from the SD card slots and 1/4-inch screw hole. Casual users who simply want scratch and dust protection will appreciate the precise fit and built-in handle. Users who do not own the Anker Prime A1340 specifically, or who need a waterproof or ruggedized solution, should look elsewhere.

Compatibility

The SIKAI CASE silicone cover is designed exclusively for the Anker Prime 27,650mAh 250W power bank, identified by Anker model number A1340. The manufacturer states that all cutouts are precisely matched to this specific model's display, ports, and labels. This case will not fit other Anker power banks such as the Anker Prime 200W, Anker 737, or any non-Prime Anker models. It is also incompatible with power banks from other brands regardless of similar dimensions.

Before purchasing, verify that your Anker power bank is the exact A1340 model. The model number is typically printed on the power bank itself or listed on its original packaging. If you own a different Anker Prime variant or a different capacity model, this case is unlikely to fit correctly and port access may be blocked.

Build Quality

SIKAI CASE describes the case material as solid silicone rather than a thin, flexible skin. The brand states it has over 13 years of experience in silicone product design and development, and the company emphasizes durability and long-lasting protection over minimal aesthetics. The silicone construction should provide a soft, grippy surface that absorbs minor impacts and resists everyday scratches and dust accumulation.

The case features what SIKAI CASE calls a dual-curve design intended to complement the Anker Prime 250W's shape. The built-in handle is integrated into the silicone body rather than attached separately, which may contribute to overall structural integrity. The 1/4-inch copper screw hole is embedded in the case for mounting purposes. No specific durability ratings, drop-test results, or water-resistance claims are provided in the product data, so users should treat this as a general-purpose protective case rather than a ruggedized enclosure.

Warranty & Support

SIKAI CASE includes an 18-month warranty with this silicone case. The product listing also mentions friendly customer service as part of the purchase. The package includes one silicone case designed for the Anker Prime 27,650mAh 250W power bank (A1340). No other accessories, cables, or power banks are included.

For warranty claims or product questions, buyers would need to contact SIKAI CASE through the channels provided with their purchase. As with any third-party accessory, the warranty covers the case itself and does not extend to the Anker power bank or any other devices used with it.

2
Editor's Pick

JDHDL Silicone Case for Anker 25000mAh 165W Laptop

JDHDL
9.9 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This is a silicone protective case designed exclusively for the Anker 25000mAh 165W laptop power bank, adding scratch and scuff protection along with a built-in cable holder for tangle-free organization. It's best suited for travelers, commuters, and everyday users who want to keep their Anker power bank in pristine condition without adding significant bulk.
Pros & Cons

Pros

  • Precision-fit design for the Anker 25000mAh 165W power bank eliminates gaps and sliding, providing snug all-around coverage
  • Integrated cable holder on the back reduces cable clutter and keeps charging cables accessible without a separate organizer
  • Lightweight at approximately 100g with only 2.3mm thickness, so it adds minimal bulk to an already sizable laptop power bank
  • Non-slip silicone surface improves grip, which is helpful when handling a heavier laptop-class power bank
  • Easy snap-on installation and removal without scratching the power bank's surface

Cons

  • Only compatible with the specific Anker 25000mAh 165W laptop power bank - will not fit other Anker models or other brands
  • The power bank and charging cable are not included, so this is a case-only purchase
  • Silicone cases can attract lint and dust over time, which may require occasional cleaning
Detailed Review

The JDHDL silicone case is a protective accessory designed exclusively for the Anker 25000mAh 165W laptop power bank. This is not a power bank itself - it is a form-fitting silicone cover that shields the Anker unit from scratches, scuffs, dust, and minor impacts during daily use and travel. The case is best suited for anyone who already owns or plans to purchase the Anker 25000mAh 165W laptop power bank and wants to protect their investment while keeping a charging cable neatly organized.

The case measures approximately 6.31 x 2.25 x 2.2 inches externally and weighs about 100g (roughly 0.15 pounds), adding only 2.3mm of thickness around the power bank. For users carrying a high-capacity laptop power bank in a backpack, messenger bag, or suitcase, that minimal added bulk is a practical tradeoff for full-body protection. The manufacturer highlights precision-cut openings that align with the Anker power bank's LED display, charging ports, and rating labels, so users should not need to remove the case to check battery status, connect cables, or verify specifications during airport security checks.

Build quality centers on flexible, stretchable silicone that the manufacturer describes as non-slip and resistant to deformation after repeated use. The soft material is intended to make installation and removal quick - seconds, according to the product description - without scratching the power bank's housing. A standout design feature is the built-in cable holder on the back of the case, which lets users wrap and secure a charging cable directly against the power bank rather than tossing a loose cable into a bag. For travelers and commuters who deal with tangled cables regularly, this integrated organizer adds genuine everyday convenience.

Setup is straightforward: stretch the silicone case over the Anker 25000mAh 165W power bank and confirm that all cutouts line up with the ports and display. The manufacturer states the case is TSA-friendly, meaning it should not need to be removed during airport security screening. However, travelers should always verify current airline and security policies independently, as rules can vary by carrier and jurisdiction. For daily use, the non-slip grip may help when handling the power bank on a desk, in a car, or while pulling it from a bag.

The most significant limitation is compatibility: this case fits only the Anker 25000mAh 165W laptop power bank. It will not work with other Anker models, other capacities, or power banks from different brands. Additionally, neither the power bank nor a charging cable is included in the package - buyers receive only the silicone case. Silicone material, while durable and flexible, can attract pocket lint and dust, so users who are particular about appearance may need to wipe the case down periodically.

This JDHDL silicone case is a practical purchase for anyone who already owns the Anker 25000mAh 165W laptop power bank and regularly carries it for travel, commuting, or outdoor use. The combination of full-body scratch protection, a built-in cable holder, and minimal added weight makes it a focused accessory for keeping a premium power bank organized and protected. Users who own a different power bank model or who are looking for the power bank itself should look elsewhere, but for Anker 25000mAh 165W owners, this case addresses real everyday pain points at a reasonable accessory price point.

Compatibility

The JDHDL silicone case is exclusively designed for the Anker 25000mAh 165W laptop power bank. The manufacturer emphasizes a zero-gap fit, meaning the case dimensions are tailored to the exact shape of that specific Anker model. Users should not expect this case to fit other Anker power banks with different capacities or form factors, nor will it accommodate power banks from brands like Baseus, Ugreen, or others.

Before purchasing, verify that you own or are purchasing the Anker 25000mAh 165W laptop power bank specifically. The product listing does not mention compatibility with any other Anker variant, and attempting to use it on a differently sized unit could result in a poor fit, blocked ports, or an inability to install the case properly.

Travel Use

The manufacturer describes this silicone case as TSA-friendly, stating that the power bank does not need to be removed from the case during airport security screening. This is a practical convenience for frequent flyers who carry laptop power banks and want to move through security efficiently. However, TSA and airline policies can change, and international security procedures may differ, so travelers should always confirm current rules before flying.

The built-in cable holder on the back of the case is particularly useful for travel, keeping a charging cable secured against the power bank rather than loose in a carry-on bag. For road trips, conference travel, or outdoor excursions, the all-around silicone coverage helps prevent cosmetic damage from being jostled alongside other gear in a bag or backpack. The case weighs only about 100g, so it should not meaningfully affect the overall carrying weight of the power bank setup.

Build Quality

The JDHDL case is constructed from flexible silicone with a listed thickness of 2.3mm (0.09 inches). The manufacturer describes the material as soft, non-slip, and stretchable, allowing quick installation and removal without scratching the power bank surface. The silicone is also described as resistant to deformation even after repeated use, which suggests it should maintain its shape and snug fit over time.

Precision-cut openings are designed to align with the Anker power bank's LED display, all charging ports, and the rating label. This attention to cutout placement means users should be able to check remaining battery capacity, connect USB-C or other cables, and read product specifications without removing the case. The non-slip surface also adds practical grip when handling a heavier laptop-class power bank, reducing the chance of accidental drops.

3
Limited Time

RARAYC 2-Pack Magnetic Cup Holder for Boats

RARAYC
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This is not a power bank or charging accessory - it is a 2-pack of magnetic cup holders designed for boats, trucks, RVs, and other metal surfaces. The RARAYC magnetic cup holders use six rare earth magnets per base and may appeal to boaters or RV owners who need a convenient drink-holding solution on metal surfaces.
Pros & Cons

Pros

  • Two-pack provides a pair of holders for flexible placement across boats, trucks, or RVs
  • Six rare earth magnets per holder offer strong magnetic attachment to qualifying metal surfaces
  • Anti-rust coating and rubber base support both indoor and outdoor durability
  • No tools or permanent mounting required - simply place on a metal surface

Cons

  • Only works on metal surfaces thicker than 1.2mm - will not attach to plastic, wood, fiberglass, or thin metal panels
  • Maximum container diameter of 3.15 inches limits compatibility with larger bottles, tumblers, or oversized cups
  • This is not a charging product, power bank, or mobile charging accessory
Detailed Review

The RARAYC Magnetic Cup Holder is a 2-pack of drink holders designed for metal surfaces on boats, yachts, trucks, RVs, apartments, and courtyards. This product is not a power bank, portable charger, battery pack, charging cable, or any type of mobile charging accessory. Shoppers looking for portable power or charging solutions should look elsewhere, as this product serves an entirely different purpose - holding beverages securely on metal surfaces using magnetic attachment.

Each RARAYC magnetic cup holder is equipped with six rare earth magnets inside the base, providing magnetic attachment to ferrous metal surfaces. The manufacturer specifies that the metal surface must be thicker than 0.047 inches (1.2mm) for the holder to stay in place securely. This means the holders will not work on thin sheet metal, aluminum, plastic, wood, fiberglass, or other non-ferrous materials. The cup holders accommodate containers with a maximum diameter of approximately 3.15 inches (8cm), which fits standard cans and many smaller cups but may exclude larger travel mugs, wide-mouth water bottles, or oversized tumblers.

The build features a B11-2 black acrylic electrophoretic coating that the manufacturer describes as having excellent anti-rusting properties, an improvement over conventional pure phenolic resin and epoxy ester coatings. The bottom of each holder includes a circular black anti-slip rubber coating designed to prevent scratching on the metal surface and reduce the chance of the holder sliding. These design choices suggest the product is intended for environments exposed to moisture and weather, such as marine and outdoor settings.

Setup is straightforward since no tools, drilling, or permanent installation is required. Users simply place the magnetic base on a qualifying metal surface, and the rare earth magnets hold the cup holder in position. This makes the holders easy to reposition as needed. The compact dimensions of approximately 4.6 x 4.3 x 4.3 inches per unit keep each holder relatively unobtrusive on a boat console, truck dashboard, RV countertop, or metal patio table.

The most significant limitation is the strict requirement for a sufficiently thick ferrous metal surface. Many modern boats, vehicles, and outdoor structures use non-magnetic materials like aluminum, stainless steel alloys, fiberglass, or plastic where these holders simply will not attach. Additionally, the 3.15-inch maximum container diameter may exclude popular larger drinkware. Buyers should measure both their intended mounting surface thickness and their preferred cup or bottle diameter before purchasing.

This product is best suited for boat owners, RV users, truck drivers, and anyone who needs a no-installation drink holder on a thick metal surface. It is not suitable for shoppers seeking power banks, portable chargers, charging cables, wireless chargers, or any mobile charging solution. Users who need portable power for smartphones, tablets, laptops, or other electronic devices should consider a dedicated power bank or charging accessory instead.

4
Top Rated

SIKAI CASE Silicone Protective Cover for Anker

SIKAI CASE
9.8 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
The SIKAI CASE Silicone Protective Cover is a custom-molded accessory tailored specifically for the Anker 165W 25,000mAh Laptop Power Bank (Model A1695). It provides 2.2mm shock-absorbing silicone protection, integrated SD card storage, and a 1/4-inch tripod thread, making it an excellent addition for photographers, mobile creators, and frequent travelers.
Pros & Cons

Pros

  • Tailored precision fit for Anker Laptop Power Bank 165W (Model A1695)
  • 1/4-inch copper screw hole offers versatile mounting for photographers and videographers
  • Integrated storage holds extra SD and SIM cards securely
  • Integrated dust flap protects charging ports from backpack dirt and lint

Cons

  • Includes the protective case only; the Anker power bank is not included
  • Strictly compatible with Anker model A1695 and will not fit other portable chargers
  • Adds 3.46 ounces and slight physical bulk to an already substantial battery pack
Detailed Review

The SIKAI CASE Silicone Protective Cover is a dedicated protective sleeve engineered exclusively for the Anker Laptop Power Bank 165W (25,000mAh, Model A1695). Instead of carrying an expensive, high-capacity battery pack exposed in a backpack or work tote, this accessory provides an impact-dampening barrier against scrapes, small drops, and daily surface wear. It is tailored for content creators, photographers, field technicians, commuters, and road warriors who rely on their high-output Anker battery to run laptops and smartphones away from wall outlets.

Constructed from flexible, high-grade silicone measuring 0.08 inches (2.2mm) in thickness, the sleeve provides a comfortable, slip-resistant exterior texture. The external dimensions measure 6.38 by 2.41 by 2.2 inches, and the unit adds approximately 3.46 ounces (98 grams) to your everyday carry. The dual-curve profile traces the exact physical dimensions of the A1695 power bank, offering corner and edge cushioning that helps absorb standard travel impacts without slipping off the battery pack during routine use.

Beyond standard impact defense, SIKAI CASE integrates several hardware features tailored for creators and traveling professionals. A built-in 1/4-inch copper nut hole allows users to securely attach the heavy battery pack to tripods, camera cages, or lighting equipment, which is especially beneficial when powering video cameras or studio setups. Additionally, a dedicated card slot module provides safe storage for SD and SIM cards, keeping critical memory cards organized and protected from loss while shooting on location.

Daily operation and monitoring remain smooth thanks to accurate port alignment and tailored openings. A precision cutout exposes the power bank front smart digital display, letting you verify remaining battery percentage and active charging wattage at a glance. To maintain clean port contacts over time, a hidden dust flap covers the charging interfaces when not in use, while a cross-shaped silicone opening flexes neatly around retractable cable joints for a secure fit that prevents loose edges.

The primary limitation is strict model compatibility. This protective case is designed specifically for the Anker 165W 25,000mAh Laptop Power Bank (Model A1695) and will not properly fit other Anker models, generic battery packs, or chargers with different port configurations. Shoppers should also note that this product listing includes only the silicone protective cover; the power bank itself, charging cables, and memory cards must be purchased or supplied separately.

For owners of the Anker A1695 who want to protect their investment from cosmetic damage, dust ingress, and travel drops, this SIKAI CASE cover offers outstanding practical utility. The addition of memory card slots and a standard 1/4-inch tripod thread makes it especially compelling for photographers and mobile creators seeking a functional, protective upgrade for their mobile power setup.

Build Quality & Utility

The SIKAI CASE silicone cover features a 2.2mm wall thickness that provides meaningful impact resistance without adding unnecessary weight. The silicone compound offers an enhanced grip, reducing the chance of accidental drops when handling a heavy, high-capacity battery pack in transit.

Utility is enhanced by the embedded 1/4-inch copper screw socket, which provides a standard threaded mount for tripods and camera gear. Paired with onboard storage slots for SD and SIM cards, this case serves as a functional tool for mobile media creators who need organized field power.

Compatibility & Fit

This case is precision-molded strictly for the Anker Laptop Power Bank 165W (25,000mAh, Model A1695). Precise cutouts align with the primary digital screen, specifications label, and interface ports, ensuring that display visibility and cooling airflow remain unobstructed.

A specialized cross-shaped silicone cut conforms around the integrated or retractable cable connection points of the A1695. Buyers should verify their power bank model number prior to purchase, as dimensional variations will prevent this cover from properly fitting other portable chargers.

5

Casmilee Hard Carrying Case for Anker MagGo

casmilee
9.6 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This is a protective hard-shell carrying case designed specifically for Anker MagGo and Baseus magnetic portable chargers, not a power bank itself. Its biggest advantage is purpose-built interior sizing with an elastic belt and mesh pocket for cable storage, making it ideal for commuters, travelers, and everyday-carry users who want to protect their compact power bank from drops, scratches, and dust.
Pros & Cons

Pros

  • Specifically designed interior dimensions fit popular Anker MagGo 633, 622, 621, 321, and Baseus 6000mAh magnetic chargers without rattling or shifting
  • Hard EVA material offers meaningful drop, scratch, and splash protection for daily transport situations
  • Elastic belt and mesh pocket provide organized storage for the charger plus a cable or small accessory in one compact package
  • Very lightweight at roughly 0.18 pounds, adding minimal bulk to a bag or pocket
  • Hand strap and compact form factor make it easy to grab and go or attach to a bag

Cons

  • This is a case only - the power bank, cables, and any other accessories are not included, which some buyers may overlook before purchasing
  • Only fits the specific Anker and Baseus models listed - other power banks may not fit the internal dimensions properly, so careful measurement is necessary
  • The mesh pocket is relatively small and limited to slim accessories like a single cable or earbuds rather than larger items
Detailed Review

The Casmilee hard carrying case is a protective travel organizer built specifically for compact magnetic portable chargers, not a power bank or charger itself. It is designed to fit the Anker MagGo 633 (10,000mAh), Anker 622, 621, and 321 (5,000mAh), and the Baseus 6000mAh foldable magnetic wireless portable charger. This case suits daily commuters, frequent travelers, students, and everyday-carry users who want to keep their compact power bank protected and organized alongside a charging cable or small accessory. If you own one of these specific Anker MagGo or Baseus models and regularly toss your charger into a bag, this case addresses the common problem of scratches, dust, and minor impact damage during transport.

The case is constructed from hard-shell EVA (ethylene vinyl acetate) material, which the manufacturer describes as shockproof, dustproof, and splash-resistant. EVA is a common material in electronics carrying cases because it absorbs minor impacts while remaining lightweight. The exterior dimensions are listed at approximately 7.09 x 3.54 x 1.57 inches, and the internal dimensions are approximately 6.3 x 2.92 inches. The total weight is listed at roughly 0.18 pounds, so the case adds very little bulk to a backpack, purse, briefcase, or suitcase. The black exterior has a clean, understated look suitable for office, gym, or travel settings.

Inside the case, an elastic belt holds the power bank firmly in place to prevent shifting during movement. A half-mesh pocket on the opposite side provides space for a USB-C charging cable, small earbuds, or another slim accessory. This dual-storage layout means you can keep your charger and its cable together in one organized package rather than having them loose in a bag. The zipper is described as smooth and strong, and a hand strap is included for convenient carrying or for clipping the case to a bag handle. These details make the case practical for people who move between locations frequently, whether commuting on public transit, walking across a college campus, or navigating an airport.

Setup is straightforward - place your compatible power bank inside, secure it with the elastic belt, tuck a cable into the mesh pocket, and zip it closed. The case can slide into a backpack or purse, sit in a suitcase pocket, or hang from a bag using the hand strap. For travelers and commuters, the compact footprint means it does not take up significant space alongside other essentials. The hard shell offers peace of mind against the kind of bumps and compression that happen inside crowded bags, especially during flights or packed commutes.

The most important limitation is compatibility. This case is designed exclusively for the Anker MagGo 633, 622, 621, 321, and the Baseus 6000mAh foldable magnetic charger. Other power banks, even those with similar capacities, may not fit the internal dimensions properly. The manufacturer emphasizes measuring your power bank against the listed 6.3 x 2.92-inch internal dimensions before purchasing. Additionally, this is a case only - no power bank, cables, or other accessories are included. The mesh pocket is sized for small items, so bulkier cables or adapters may not fit comfortably alongside the charger.

This carrying case is best suited for anyone who already owns one of the listed Anker MagGo or Baseus portable chargers and wants organized, protective storage for daily use or travel. The strongest reason to consider it is the purpose-built interior that keeps a compact magnetic power bank and a cable together in a lightweight, hard-shell package. Users who own a different power bank model or who need storage for larger accessories should measure carefully or look for a case with different internal dimensions. For Anker MagGo owners who commute, travel, or simply want to keep their charger in good condition, this case offers a practical and affordable organizational solution.

Compatibility

The Casmilee carrying case is designed to fit the following specific portable charger models: Anker 633 MagGo (10,000mAh), Anker 622 MagGo (5,000mAh), Anker 621 MagGo (5,000mAh), Anker 321 (5,000mAh), and the Baseus 6000mAh foldable magnetic wireless portable charger. The internal dimensions are listed at approximately 6.3 inches long by 2.92 inches wide. Any power bank that does not match these dimensions or the listed models may not fit securely inside the elastic belt holder.

Before purchasing, measure your specific power bank against the listed internal dimensions. Even models from the same brand with different capacity ratings or form factors may have slightly different physical sizes. The manufacturer is clear that this case is not a universal fit - it is purpose-built for the models listed above. If you own a different Anker model, a larger power bank, or a charger from another brand, verify the physical dimensions to avoid a poor fit.

Portability

At approximately 0.18 pounds and outer dimensions of roughly 7.09 x 3.54 x 1.57 inches, the Casmilee case is lightweight and compact enough to fit into most backpacks, purses, briefcases, and suitcase pockets without taking up significant space. The included hand strap allows the case to be carried independently or hung from a bag handle for quick access.

For commuters, the slim profile means it can sit alongside a laptop, notebook, or water bottle without adding noticeable weight. For travelers, the hard-shell construction provides protection during the compression and jostling common in carry-on bags and personal items. Students and office workers may find it useful for keeping a charger and cable neatly organized in a backpack or desk drawer rather than loose among other items.

Build Quality

The case uses a hard EVA shell, a material commonly found in protective electronics cases because it combines impact absorption with light weight. The manufacturer describes the case as shockproof, dustproof, and splash-resistant. These properties are intended to protect the stored power bank from drops, scratches, bumps, and minor exposure to moisture or dust during everyday transport.

It is worth noting that splash resistance is not the same as waterproofing. The case should not be submerged or exposed to heavy rain without additional protection. The zipper closure keeps dust and small debris out during normal use. Overall, the EVA construction is a practical choice for a carrying case that needs to withstand the routine wear and tear of daily commuting, travel, and outdoor use without adding significant weight or bulk.

6

ALLPRIMO Hard Shell Case for Anker 313/523

ALLPRIMO
9.5 /10
BLW Score
BLW Score is calculated based on product ratings, reviews, and sales performance to help you make informed purchasing decisions. Learn more ›
This is a hard-shell carrying case designed specifically to protect and organize the Anker 313 or Anker 523 10000mAh slim power banks during travel and daily use. Its biggest advantage is the snug, protective fit with an internal elastic band and mesh pocket for cables, making it a practical accessory for commuters, travelers, and everyday-carry users who want to keep their power bank and charging accessories organized in one place.
Pros & Cons

Pros

  • Purpose-built internal dimensions (6.1 x 2.95 x 0.59 inches) provide a snug fit for Anker 313 and 523 slim power banks, reducing internal movement
  • Hard-shell construction offers meaningful protection against drops, compression in bags, and dust exposure compared to carrying a power bank loose
  • Mesh pocket keeps USB cables organized alongside the power bank, eliminating the need to dig through a bag for separate accessories
  • Lightweight at under 0.19 pounds and compact enough to slide into most bags without adding noticeable bulk
  • Removable hand strap adds carrying flexibility for users who want quick access without opening a larger bag

Cons

  • This is an empty case only and does not include a power bank, cables, or any charging accessories
  • The tailored internal dimensions mean this case is unlikely to fit power banks from other brands or models that differ in size from the Anker 313/523 slim form factor
  • The case adds external bulk (7 x 3.75 x 1.5 inches) compared to simply carrying the slim power bank by itself, which may matter for minimalist everyday-carry setups
Detailed Review

The ALLPRIMO Hard Shell Case is a protective carrying case designed specifically for the Anker 313 (PowerCore Slim 10K) and Anker 523 (PowerCore Slim 10K PD) 10000mAh portable chargers. This is not a power bank or charger itself - it's an accessory case built to protect, organize, and transport a slim power bank along with its charging cables. It best suits commuters, frequent travelers, students, and everyday-carry users who toss their power bank into a bag and want to keep it protected from impacts, dust, and scratches while also keeping cables organized in one spot.

The case features a hard-shell exterior that the manufacturer describes as splash-proof, shockproof, and dust-resistant. These properties are intended to shield the Anker slim power bank from the kind of bumps, compression, and minor spills that can happen inside a backpack, purse, or suitcase. The internal dimensions are listed at 6.1 x 2.95 x 0.59 inches, which closely matches the slim profile of the compatible Anker power banks. An internal elastic bandage secures the power bank in place so it won't slide around or fall out when the case is unzipped. A mesh pocket on the opposite side provides storage for USB cables or other small accessories, keeping everything needed for a charging setup consolidated in one organized package.

The external dimensions measure 7 x 3.75 x 1.5 inches, and the case weighs under 0.19 pounds. That's compact and light enough to fit into most backpacks, messenger bags, purses, and carry-on luggage without adding significant weight or bulk. A removable hand strap allows the case to be carried independently or clipped to a bag handle for quick access. The smooth zipper is designed for easy one-handed operation, which can be convenient when grabbing the power bank during a commute or between flights.

Setup is straightforward - place the Anker 313 or 523 power bank into the case, secure it under the elastic band, tuck cables into the mesh pocket, and zip it closed. There's no assembly or complicated organization required. For travelers and commuters, the case simplifies the routine of packing and unpacking a portable charger by keeping the power bank and its cable together rather than scattered loose in a bag. The case is sold in black and is listed as size M, which corresponds to the Anker slim 10000mAh form factor.

The most important limitation is compatibility. Because the internal dimensions are tailored to the Anker 313 and 523 slim power banks, this case is unlikely to accommodate power banks from other brands or even other Anker models with different dimensions. Shoppers who own a different power bank should carefully compare their device's measurements against the listed 6.1 x 2.95 x 0.59-inch internal space before purchasing. Additionally, this is an empty case - no power bank, cables, or chargers are included. The added external footprint of the case also means it takes up slightly more bag space than carrying the slim power bank alone, which could matter for ultra-minimalist everyday-carry preferences.

This ALLPRIMO case is a practical buy for anyone who already owns an Anker 313 or Anker 523 10000mAh slim power bank and wants a dedicated, organized way to carry it. It's especially useful for frequent travelers, airline passengers, students who keep a power bank in a backpack daily, and commuters who want to prevent their charger and cables from getting scratched or tangled. Users who don't own one of the specifically compatible Anker models, or who prefer carrying their power bank without a case for maximum compactness, should look elsewhere. The strongest reason to choose this case is the purpose-built fit combined with cable organization and hard-shell protection at a low accessory price point.

Compatibility

The ALLPRIMO case is designed to fit two specific Anker power bank models: the Anker 313 Power Bank (PowerCore Slim 10K) with 10000mAh capacity, and the Anker 523 Power Bank (PowerCore Slim 10K PD) with 10000mAh capacity and USB-C 20W Power Delivery. The internal dimensions of 6.1 x 2.95 x 0.59 inches are tailored to these slim form factors. Power banks from other brands or Anker models with different dimensions may not fit properly.

Before purchasing, measure your existing power bank and compare its length, width, and thickness against the listed internal dimensions. A power bank that is even slightly thicker or wider than the internal space may not close securely or may put excessive pressure on the zipper. Conversely, a significantly smaller power bank may slide around inside the case even with the elastic band, reducing the protective benefit.

Portability

The ALLPRIMO case measures 7 x 3.75 x 1.5 inches externally and weighs under 0.19 pounds. For context, that's roughly the footprint of a large smartphone, making it easy to slip into a backpack pocket, purse compartment, or suitcase organizer. The removable hand strap provides a convenient carry option when the case needs to be grabbed quickly during commutes or at airports.

For travelers and airline passengers, the case helps keep a slim power bank and its cable together in one easy-to-locate package inside carry-on luggage. Students and office workers who carry a power bank daily may appreciate the added protection from the hard shell, especially in crowded backpacks where the power bank might otherwise get scratched by keys, pens, or other items.

Build Quality

The ALLPRIMO case uses a hard-shell construction that the manufacturer describes as splash-proof, shockproof, and dust-resistant. The hard exterior is intended to absorb minor impacts and prevent compression damage that could occur when a power bank is packed loosely in a bag. The smooth zipper is designed for repeated easy use without snagging.

Inside, the elastic bandage provides a secure hold on the power bank, and the mesh pocket adds a practical organizational element for cables. The overall build appears focused on functional protection rather than premium aesthetics. At its listed weight of under 0.19 pounds, the case adds very little heft to an everyday-carry or travel kit.

Frequently Asked Questions

Do these silicone cases block access to USB-C ports or the power bank display?

No. Both the SIKAI CASE and JDHDL silicone cases feature precision-cut openings that align with the LED display, all charging ports, and rating labels. The product descriptions confirm that USB-C input/output ports, data transfer ports, and the screen remain fully accessible while the case is installed. The SIKAI CASE models also include a hidden dust cover for the charging port area, which can help keep debris out when the power bank isn’t in use.

Will the SIKAI CASE silicone case fit any Anker power bank?

No, each SIKAI CASE is designed for a specific Anker model. The Silicone Case for Anker Prime Power Bank 27,650mAh fits only the Anker Prime 250W (model A1340), measuring 6.54 x 2.44 x 2.64 inches externally. The Silicone Case for Anker Laptop Power Bank fits only the Anker 165W model (A1695), measuring 6.38 x 2.41 x 2.2 inches. Using the wrong case on a different Anker model will result in a poor fit, so always confirm your power bank model number before buying.

What’s the difference between the SIKAI CASE and JDHDL silicone cases for the Anker 165W power bank?

Both fit the Anker 25,000mAh 165W Laptop Power Bank, but they differ in extras. The Silicone Case for Anker Laptop Power Bank from SIKAI CASE includes a 1/4-inch copper screw hole and SD/SIM card storage slots, which may appeal to photographers and frequent travelers. It also features a unique cross-shaped cable opening and a hidden dust cover. The JDHDL Silicone Case for Anker Laptop Power Bank weighs about 100g, includes a built-in charging cable holder on the back, and is described as TSA-friendly. Both weigh under 100g and add roughly 2.2-2.3mm of thickness.

Can the magnetic cup holder hold an Anker power bank?

The 2 Pcs Magnetic Cup Holder is designed for drink containers up to 3.15 inches (8cm) in diameter. It’s not specifically built for power banks, but smaller cylindrical or slim power banks that fit within that diameter could potentially sit in the holder. The six rare earth magnets per base require a metal surface at least 1.2mm thick. This product is primarily intended for boats, trucks, RVs, and similar environments, so it may serve as a convenient cup holder anker power bank station in vehicles with metal dashboards or surfaces.

Are the hard-shell carrying cases waterproof?

Neither the Power Bank Case for Anker MagGo 633/622/621/321 nor the Power Bank Case for Anker 313/523 10000mAh is described as waterproof. Both are listed as splash-resistant, shockproof, and dustproof thanks to their EVA hard-shell construction. They can handle light splashes and minor impacts, but submerging them or exposing them to heavy rain isn’t recommended. Both include internal elastic bands to secure the power bank and mesh pockets for USB-C cables and small accessories. For anyone who needs a deeper look at wireless Anker options, our wireless Anker power bank for Samsung and Android roundup covers compatible models.

Do any of these cases include the power bank or cables?

No. Every product in this list is a case or holder only. The Anker power bank, charging cables, and any other accessories must be purchased separately. This applies to all six products, including the silicone cases from SIKAI CASE and JDHDL, the hard-shell cases from casmilee and ALLPRIMO, and the magnetic cup holders from RARAYC. Always double-check internal dimensions against your specific power bank model before ordering to ensure a proper fit.

Which carrying case works for the Anker MagGo portable charger?

The Power Bank Case for Anker MagGo 633/622/621/321 from casmilee is specifically designed for the Anker 633 MagGo (10,000mAh), Anker 622/621/321 (5,000mAh), and Baseus 6,000mAh foldable magnetic wireless portable chargers. Its internal dimensions are approximately 6.3 x 2.92 inches. It features a hand strap for easy carrying and can be hung on a backpack, making it a practical option for instant setup Anker power bank users who want quick access to their magnetic portable charger while traveling.